Ultra High Pressure Bumper Turret2" NPT x 1.5" NH 12V monitor, U2 logic box, Joystick, 60gpm 1100 psi nozzle - DISCONTINUED

Features

The Ultra High Pressure line of products is designed to operate at pressures up to 1500 psi and deliver ultra-fine water droplets at high velocity for increased heat absorption and rapid fire extinguishment. This technology enhances your firefighting capabilities by rapidly reducing the temperatures within an enclosed area, increases your positive pressure ventilation capacity, and dramatically reduces personnel fatigue while using two-thirds less water.

Ultra High Pressure Bumper Turret features include:

- Durable stainless steel & brass construction
- Flows up to 300 GPM at pressures up to 1500 psi
- Vertical Travel: +70° & -30°
- Horizontal Travel: 180°
- 12V & 24V
- Position Feedback (Rotation only)
- Uses Universal II Monitor Control System

Ultra High Pressure Bumper Turret2" NPT x 1.5" NH 12V monitor, U2 logic box, Joystick, 60gpm 1100 psi nozzle - DISCONTINUED Video

Specifications

3450 Ultra-High Pressure Monitor Specifications

The 300gpm rated monitor shall be an all electric single waterway monitor constructed of stainless steel. The monitor shall have a 2" NPT inlet and a 1 ½" NH outlet. The monitor shall have fully enclosed 12 or 24 volt motors. Each joint shall be ball bearing free and have a maximum pressure rating of 1500psi. The monitor shall not to exceed 11 9/32"H x 15 25/32"W x 11 ½"L. The vertical travel shall be from 30° below to 75° above horizontal and the horizontal rotation shall be 180°. Each control box shall control the vertical and horizontal rotation of the monitor. The travel speed for each joint shall be 20°/sec. The monitor shall have horizontal position feedback and the option for a programmable stow position, auto oscillation, and control of valve operation. The monitor shall use the style 6032 universal II control system logic box. The logic box shall have two multi-pin connectors, one for the monitor interface and one for the vehicle interface and have an IP65 rated enclosure with pressure equalization device. The control system shall be capable of operating on 12 or 24 volt dc systems without extra devices, i.e. voltage converters. The control system shall be capable of communicating over the Controller Area Network (CAN) bus to vehicle mounted peripheral control devices. The weight of the monitor shall be 61lbs. less nozzle.